Incoloy 800 Coil/Foil/Shim Supplier, Exporter & Manufacturer in Mumbai, India

Incoloy 800 Coil, Foil & Shim are produced from a nickel-iron-chromium alloy developed to deliver reliable high-temperature strength, oxidation resistance, durability, and mechanical stability in demanding industrial environments. The alloy’s composition helps it retain useful mechanical properties during prolonged heat exposure while providing resistance to oxidation and scaling at elevated temperatures. Available in a range of thicknesses, widths, dimensions, surface finishes, and tolerances, these products are suitable for precision cutting, forming, fabrication, and component manufacturing applications. Their combination of heat resistance, structural stability, and dependable service performance makes them suitable for industrial furnaces, heat exchangers, petrochemical processing equipment, power generation systems, thermal treatment units, and high-temperature manufacturing facilities. Product selection should be based on the intended operating temperature, service conditions, fabrication requirements, and applicable material standards.

Parameter	Specification
Material Grade	Incoloy 800 / Alloy 800
UNS Number	N08800
Werkstoff Number	1.4876
Material Type	Nickel-Iron-Chromium Alloy
Applicable Standard	ASTM B409 / ASME SB409
Product Forms	Coils, foils, shims, strips, sheets and rolls
Thickness	As per customer requirements and availability
Width	Standard or custom-slit widths
Length	Coil form or cut-to-size lengths
Manufacturing Process	Hot-rolled or cold-rolled
Surface Finish	Bright, annealed, pickled or descaled, as specified
Supply Condition	Annealed or other agreed condition
Density	Approximately 7.94 g/cm³
Corrosion Resistance	Good resistance to oxidation, carburization and many aqueous corrosive environments
Heat Resistance	Suitable for elevated-temperature service, depending on operating conditions
Quality Inspection	Chemical analysis, dimensional inspection and mechanical testing as required
Certification	Material Test Certificate (MTC), subject to order requirements
Applications	Industrial furnaces, heat exchangers, petrochemical plants, heating-element sheaths and thermal-processing equipment

Parameter

Specification

Material Grade

Incoloy 800 / Alloy 800

UNS Number

N08800

Werkstoff Number

1.4876

Material Type

Nickel-Iron-Chromium Alloy

Applicable Standard

ASTM B409 / ASME SB409

Product Forms

Coils, foils, shims, strips, sheets and rolls

Thickness

As per customer requirements and availability

Width

Standard or custom-slit widths

Length

Coil form or cut-to-size lengths

Manufacturing Process

Hot-rolled or cold-rolled

Surface Finish

Bright, annealed, pickled or descaled, as specified

Supply Condition

Annealed or other agreed condition

Density

Approximately 7.94 g/cm³

Corrosion Resistance

Good resistance to oxidation, carburization and many aqueous corrosive environments

Heat Resistance

Suitable for elevated-temperature service, depending on operating conditions

Quality Inspection

Chemical analysis, dimensional inspection and mechanical testing as required

Certification

Material Test Certificate (MTC), subject to order requirements

Applications

Industrial furnaces, heat exchangers, petrochemical plants, heating-element sheaths and thermal-processing equipment

Element	Chemical Symbol	Composition (%)
Nickel	Ni	30.00–35.00
Chromium	Cr	19.00–23.00
Iron	Fe	39.50 min.
Carbon	C	0.10 max.
Manganese	Mn	1.50 max.
Silicon	Si	1.00 max.
Aluminum	Al	0.15–0.60
Titanium	Ti	0.15–0.60
Copper	Cu	0.75 max.
Sulfur	S	0.015 max.
Phosphorus	P	0.035 max.

Element

Chemical Symbol

Composition (%)

Nickel

30.00–35.00

Chromium

19.00–23.00

Iron

39.50 min.

Carbon

0.10 max.

Manganese

1.50 max.

Silicon

1.00 max.

Aluminum

0.15–0.60

Titanium

0.15–0.60

Copper

0.75 max.

Sulfur

0.015 max.

Phosphorus

0.035 max.

Mechanical Property	Specification
Tensile Strength, minimum	520 MPa
Yield Strength (0.2% Offset), minimum	205 MPa
Elongation, minimum	30%
Density	Approximately 7.94 g/cm³
Modulus of Elasticity	Approximately 197 GPa
Melting Range	Approximately 1357–1385°C
Hardness	Depends on thickness and material condition

Mechanical Property

Specification

Tensile Strength, minimum

520 MPa

Yield Strength (0.2% Offset), minimum

205 MPa

Elongation, minimum

30%

Density

Approximately 7.94 g/cm³

Modulus of Elasticity

Approximately 197 GPa

Melting Range

Approximately 1357–1385°C

Hardness

Depends on thickness and material condition

Incoloy 800 Coil, Foil & Shim are widely used in industrial applications where high-temperature strength, oxidation resistance, durability, and reliable mechanical performance are important. Their nickel-iron-chromium composition helps these alloys retain useful mechanical properties during prolonged exposure to elevated temperatures while resisting oxidation and scaling under suitable service conditions. These products are commonly used in industrial furnaces, heat exchangers, petrochemical processing equipment, power generation systems, thermal processing units, and high-temperature manufacturing facilities. Available in a variety of thicknesses, widths, surface finishes, and specifications, they support precision cutting, forming, fabrication, and component manufacturing requirements. Their combination of heat resistance, mechanical stability, and oxidation resistance makes them suitable for demanding thermal applications. Final product selection should take into account the operating temperature, service environment, fabrication requirements, and applicable material standards.